The Air Arms S510 Superlite Hunter Green series was created for shooters who want a full-power, maximum accuracy sporting rifle in a lighter format. The Superlite series certainly gives that and everything else required for you to achieve your full potential.

With the Superlite series, the only thing lost is the weight you don't want. If lighter rifles are what you're looking for, 'weight' no more - the Superlites are here. Produced from poplar wood, they are a fully chequered, ambidextrous design, in a hunter green finish.

The RAT Works Edition

With the RAT Works edition your air rifle will have the APEX Regulator & Tune package which is designed to make your rifle more consistent and air efficient, not more powerful. All sub 12 (non FAC) rifles are set to around 11.5ft/lbs after any work is done, keeping you well within the legal limit.

Features of the APEX Airguns Regulator:

• UK-Made: Designed and manufactured in the UK, home to the most demanding airgun shooters.
• CNC Machined Components: Crafted from premium materials for stable regulator performance.
• More Plenum Space: Greater efficiency with less residual pressure drop on firing.
• High Resolution Pressure Setting: Ensures mechanical stability.
• Easy Reading and Setting: Clear body and adjuster markings.
• Longer Service Intervals: Larger section seals for greater reliability.
• Adjustable Pressure: Ranges from 20-170bar, maintaining pellet speed and accuracy.

When the work is done by the RAT Works the action is extensively worked on to increase the performance, efficiency, accuracy and overall feel of the rifle. Almost every aspect of the rifle is modified, changed or enhanced in some way.

Below is a list of all the work undertaken as part of the tune. We also engrave the breech block with RAT WORKS as a way of showing that your rifle has been regulated and tuned by us, this is free of charge. 

Hammer Mechanism

- Ensure the assembly is free of any oil, grease or debris which can cause consistency issues

- Re-finish hammer spring to a higher accuracy

- Polish the bearing surfaces in the hammer

- Hammer/trigger sear mating face is modified if needed

- The Hammer spring is considerably shortened to reduce the power after the regulator is fitted, this makes cocking effort much less and puts much less pressure on the trigger sears, allowing a much crisper and responsive second stage.

Loading assembly

- Loading probe modified for pellet feed and smoothness

- Bearing surfaces polished

- If you include the magazine in with your rifle they are also modified to remove any loading issues such as jamming whilst cycling

- Lubricant is added to parts of the assembly to allow a smoother action

- Bolt lock up mechanism is usually modified for more responsive and smoother movement, also increasing the rifles consistency.

Exhaust valve, transfer port & barrel

- The exhaust valve stem assembly is modified to run more efficiently

- Valve body is modified for better airflow through the firing cycle increasing efficiency

- The valve pressure is reset to give a better performance between heavy and lighter pellets

- The transfer port is modified to give a higher degree of air flow efficiency

- Crown of the barrel re-cut or polished if needed to increase the rifles accuracy

- Transfer port and barrel are aligned correctly

- The Adjuster in the transfer port is set with minimum restriction to allow a much more efficient use of air, 90% of the power setting is done with the hammer spring shortening. Only the final setting is done on this adjuster, which also helps with the FPS variance.

Trigger assembly

- Sears are polished to a smoother finish if needed

- Hammer engagement sear modified if needed to smoother let off

- Trigger let-off is set to a comfortable and safe amount.

Some parts may be chargeable although I do replace many damaged parts for free as standard. 

O-ring seals are replaced as standard throughout the rifle and refitted with the correct lubrication.

Quick Fill Conversion 

On Top of the work we carry out on the rifle, we have also fitted a quick fill end which features a pressure gauge on the front and also supplied with a new fill probe as well.

After the regulator is fitted and the tune carried out you can expect a shot to shot consistency of single figures as soon as the rifle has been worked on. A report sheet will be included with the rifle once work is complete detailing the shot to shot consistency through our SKAN chronograph, the rifle is held correctly in a mount to guarantee accurate results.  This consistency will improve further as the rifle is used.

SHIPPING DETAILS

Once you have purchased the rifle of your choice you can either come over to us and pick it up or we can ship it out.

We are unable to ship any form of firearm directly to you, due to the firearms act of 2006.

This means you must give us the details of your nearest RFD or Gun shop.

To ship firearms we use DHL courier service incurring £32.50 carriage on top of your purchase. Your RFD or Gun shop may choose to add a handling fee at their discretion.

Please make sure your the delivery address is your chosen RFD/Gun shop.

ALL new air rifles will now need to be paid in full before an air rifle is ordered from the distributer.