The RAT Works Carbon Shrouds ( BSA Rifles ONLY)

The RAT Works Carbon Fibre Shrouds

These bespoke carbon fibre shrouds are not only stunning to look at, they are lightweight, perform exceptionally well and are extremely quiet, better than any off the shelf moderator you can buy to date.

All shrouds are made to order and are available for either 12 or 15 inch barrels. The 26mm diameter shroud will fit all BSA models expect the CLX. The 30 mm diameter shroud is only available for BSA R10 models.

Please note: To measure your barrel you will need to remove and shroud or moderator parts you have on your rifle current. Then measure from the front of the magazine inlet (where the pellet enters the barrel) to the end of the treaded section of your barrel. 

Once fitted our shrouds will be the same as then length of your barrel with a standard moderator on. 

Fitting instructions will be supplied.

Please allow 5 working days for us to make your shroud. We will be in contact with you regarding either collection from us or your local RFD/Gun shop.

All shrouds must be sold face to face either by collection directly from us or from your local RFD/Gun shop, due to the 2006 firearms act.

Shrouds can only be supplied to UK customers.



You will earn 0reward points with this order

Sorry we're out of stock

We can let you know as soon as it’s available again, enter your email address below.